Home > Product > Linear Actuators > Mini Linear Actuators

Fast Linear Actuator

Fast Linear Actuator
HTA2500 Without over-current protector or Hall sensor (mm) Min Installation Size=(Stroke+105mm) With over-current protector or Hall sensor (mm) Min Installation Size=(Stroke+120mm) The screw rod is connected with the inner pipe of the push rod through a middle hole plastic screw, and the inner...
Product Details:

Fast Linear Actuator

HTA2500

图片26.jpg

图片27.jpg

Without over-current protector or Hall sensor

(mm)

        Min Installation Size=(Stroke+105mm)

图片28.jpg

With over-current protector or Hall sensor

(mm) 

         Min Installation Size=(Stroke+120mm)

图片29.jpg

图片30.jpg

图片31.jpg

图片32.jpg图片33.jpg


Fast Linear Actuator

The screw rod is connected with the inner pipe of the push rod through a middle hole plastic screw, and the inner pipe of the push rod is connected with the outer sleeve through a hard rubber sleeve. When the motor rotates, the gear rod drives the screw rod to rotate, and the screw rod pushes the push rod inner tube to move in the jacket to achieve the purpose of the electric push rod telescoping. A buffer rubber ring is arranged on the upper end of the screw rod, so as to prevent the screw rod from moving and hitting the wall of the inner pipe of the push rod, and a pin outside the buffer rubber ring prevents it from coming out. The lower end of the screw shaft has bearing fasteners, bearings, nuts, and pins. This pin is provided for connection with a transmission gear. The C-shaped clip is embedded in the push rod jacket, and a hole is formed in the clip. A screw passing through the side wall of the control box passes through the hole to fix the push rod inner tube installed in the push rod outer sheath, the screw rod and other components.

Hot Tags: fast linear actuator, China, manufacturers, customized, pricelist, in stock, free sample
Related Products
Feedback: